|
|
Post by asevie on Aug 30, 2013 16:37:33 GMT -5
Just ordered a new light for the dome. I've read a bit about converting from regular lights to LEDs and Darerock filled in the rest. No converting necessary (unless you're trying to use polarized LEDS), just order non-polarized and it's plug and play. I ordered the 'cool' white, it's a cooler blue based as opposed to the 'warm' whites which are yellow based. Much brighter and very little heat. The original light is a 1683 but you can use 1156 as a replacement. www.superbrightleds.com/moreinfo/....6-pcb-lamp/502/ |
|
|
|
Post by asevie on Aug 30, 2013 16:37:53 GMT -5
Can't get the image to upload... Why are image uploads not working? I've uploaded in other threads but for some reason can't get this one posted, here's a link.... i.imgur.com/BPue3bV.jpg |
|
|
|
Post by herm99 on Aug 30, 2013 17:25:47 GMT -5
  Looks good! |
|
|
|
Post by asevie on Aug 30, 2013 19:55:00 GMT -5
Thanks! I've been posting tons of pictures, I can't figure out why I couldn't get that one to post. The size was fine, I kept is smaller than the max. Oh well, it's in here now.
|
|
|
|
Post by asevie on Apr 19, 2014 9:48:34 GMT -5
I've since added a second light, in the above picture I only had one led light. I'll try to post a pic when can get to it.
|
|
|
|
Post by rob on Dec 18, 2014 12:22:41 GMT -5
Still not sure how it's plug and play....isn't the original bulb a fluorescent two prong?
|
|
|
|
Post by Eric on Dec 23, 2014 21:51:50 GMT -5
If have an original Chexx and I took out the old bulbs. On the side they have the bulb type #1156. I did a search on Amazon and a bunch of options come up. I purchased the bulb at the link below and it worked great. Good luck! Brightech - 2nd Generation BA15s LED Light Bulb Replacement - Warm White Color- Single Contact Bayonet Base - 10-30V DC - Replaces #1156 1141 1073 1093 1129 93 - New and Improved Design for Greatest Efficiency www.amazon.com/dp/B008XB9BJY/ref=cm_sw_r_awd_5LIMub1Y9EQJS |
|
