Post by Deleted on May 28, 2013 8:05:13 GMT -5
hi all,
(hi Herm as promised here's my finished work for now)
Bought a used super chexx in march this year, been working all my spare time on this since then. It was pretty dirty when i bought it, but overall it was still in pretty decent shape. its a 2005. It came with the classic ugly red & blue players so i had to remedy to all that. Before you ask, theres approximatly 30 hours of work in there. And you wont see these changes on the pics, but I also upgraded the Coin Doors mechanism so they now both work with canadien 1$ looney. I changed two, 4’’ inch metal bolts, underneath the ice surface near the face off spot. All of you regular players probably noticed that too while playing, theres a few spots which retains the puck because of magnetism. So does the puck ejector solenoid but this one i am stuck with it so far. So I decided to replace them with two 4’’ inch brass bolts instead. Now theres 2 less magnetism spot on my ice surface, and the puck no longer deviate when it goes over the brass bolts.
Next step, i am going to make, all the STICKERS around the cabinet, both 16'' inch diameter stickers (montreal & boston LOGO) to apply on both side of the podium, plus the side ones on the table, and the center ice Montreal Bell center logo....if any of you have ideas for me, i am open to any kind of customising..
Again enjoy the pics….
(hi Herm as promised here's my finished work for now)
Bought a used super chexx in march this year, been working all my spare time on this since then. It was pretty dirty when i bought it, but overall it was still in pretty decent shape. its a 2005. It came with the classic ugly red & blue players so i had to remedy to all that. Before you ask, theres approximatly 30 hours of work in there. And you wont see these changes on the pics, but I also upgraded the Coin Doors mechanism so they now both work with canadien 1$ looney. I changed two, 4’’ inch metal bolts, underneath the ice surface near the face off spot. All of you regular players probably noticed that too while playing, theres a few spots which retains the puck because of magnetism. So does the puck ejector solenoid but this one i am stuck with it so far. So I decided to replace them with two 4’’ inch brass bolts instead. Now theres 2 less magnetism spot on my ice surface, and the puck no longer deviate when it goes over the brass bolts.
Next step, i am going to make, all the STICKERS around the cabinet, both 16'' inch diameter stickers (montreal & boston LOGO) to apply on both side of the podium, plus the side ones on the table, and the center ice Montreal Bell center logo....if any of you have ideas for me, i am open to any kind of customising..
Again enjoy the pics….
Attachments:
