Puck not ejecting

[hotshot98]

Hey guys sorry one more quick question, I went back yesterday to talk to the guy, he wasnt there so i threw another loonie in and tried it out again for fun, and everything still works, except the light is burnt out, im not concerned about that, heck its a bulb right? but the one concern I had was the puck would not come out, the celenoid was working you could hear it when i pressed it from either side, should this scare me? or is it just an issue that the puck ramp probably has to be straightened out a little bit? Any help would be great, I know very little about these games, and you guys are the good ones, thanks guys!!!
Steve L

[Tardy23]

That is usually not a big deal. If this game was in a bar or arcade then the ramp is likely dirty and things could be blocking the puck form getting to the slot for the face off. If you hear the solenoid clicking and you can look down to see it moving then the puck is likely not there to eject. Sometime you need to gently lift the game to one side to get the puck there.
As for the light, you are correct...It's just a bulb (provided that all the other electronics on the scoreboard are working).
Good Luck with the purchase.


[glow=red,2,300]CHEERS![/glow]

[jackmeph]

I had the same problem of the puck not ejecting.
The problem was caused by the puck rounded side because of wear.

This cause the puck to stick along the puck ramp and not end up on the selenoid arm.

A brand new puck from I.C.E fixed the issue.

[hotshot98]

thanks alot guys, I bought it today, but the light the guy said he changed the bulb, and it isnt that, so im sure it is a minor wiring problem, everything else on the board works shots, period, time, goals, so i hope it is not major
a few gears are gone, but the guy said he is able to fix the gears an the ones that arent fixable he will replace them, i paid 1100 i have pictures but im not sure how to upload them on here?