jhcjr
New Member
Posts: 3
|
Post by jhcjr on Aug 3, 2013 22:29:40 GMT -5
One of my shots on goal sensors isn't working. I have done the typical switch sensors and related pcb to narrow down the culprit. It is definitely the sensor. I have looked both of them over VERY carefully, and I can see no reason why the sensor isn't working. No broken wires, solders look fine, and the connection is solid....but nothing. If there is any known issue with these to look for, I would appreciate the advice. Hopefully these pics help The one on the left is the problem child
|
|
|
Post by herm99 on Aug 6, 2013 10:07:44 GMT -5
You can purchase those separately from ICE, that might be your next move. Otherwise I might wonder if it was the main board.
|
|
jhcjr
New Member
Posts: 3
|
Post by jhcjr on Aug 6, 2013 14:34:11 GMT -5
Not the main board. I was able to isolate the issue to the sensor. Ordering
|
|