|
|
Post by FlyersFan4Life on Oct 22, 2015 8:48:38 GMT -5
|
|
|
|
Post by FlyersFan4Life on Oct 22, 2015 8:53:16 GMT -5
Also notice that the long stick man is in the center and not at right wing.
|
|
|
|
Post by peter2626 on Nov 14, 2015 10:15:26 GMT -5
old ads located here
hxxp://pinrepair.com/arcade/faceoff.htm
|
|
|
|
Post by FlyersFan4Life on Nov 16, 2015 16:43:57 GMT -5
|
|
|
|
Post by peter2626 on Nov 18, 2015 14:17:35 GMT -5
you are welcome
|
|
|
|
Post by nukenubar on Nov 25, 2017 14:59:59 GMT -5
Anyone ever hear of or remember this game that was out in 1970? The Chexx game is exactly as this old game. Check out the pics. Did Chexx purchase this design from Sega? Anyway, thought this was cool. It sold a year ago at auction for $695. Check out the old scoreboard.     Here is the url to the listing... www.biddergy.com/detail.asp?id=281652 |
|
|
|
Post by nukenubar on Nov 25, 2017 15:00:57 GMT -5
I have this game purchased in 1983 - looking for parts to replace broken players and gears
|
|
moose
New Member
Posts: 9
|
Post by moose on Sept 20, 2018 0:17:09 GMT -5
These games were made in 1983 (not 70's) by entertainment enterprises (not sega) and were sued by chexx for patent fringement. All the playfield parts including the dome were identical to chexx. They used a different pcb and a switching power supply . The pcb is almost identical to the one chexx later used in their kixx soccer (1985) ,and 89ish super chexx with the "Japanese board type" ... hmmmm... chexx parts are direct replacement including nets,players,rods,tracks,gear boxes etc. Not sure which company had the idea first but chexx won the legal battle and put them out of business.
|
|
|
|
Post by dinociccarelli20 on Nov 23, 2018 12:34:17 GMT -5
Can the guts of this machine be replaced with Chexx parts?
I have this machine but the board seems to be fried. The game starts up, but the puck ejector continuously fires the whole time. Doesn't seem to recognize the puck going in the goal either.
I'm just assuming that replacement boards for this machine are impossible to find.
Any help? It looks great, but is totally unusable right now.
|
|
moose
New Member
Posts: 9
|
Post by moose on Nov 23, 2018 12:52:56 GMT -5
It's sounds like it could just be one of the sensors under the ice.. they are reed switches and if one is stuck closed or the wires shorted it would cause this.. pull the ice surface and there is two sensors, one on either side of where the puck elects from.. they have two wires coming out of each one, this should be an open circuit normally and when the puck magnet gets close it closes it.. if they are stuck closed it could cause that
|
|
dave
Junior Member
Posts: 26
|
Post by dave on Dec 19, 2018 22:39:23 GMT -5
|
|
|
|
Post by CAPTAIN on Jan 6, 2021 22:44:14 GMT -5
Try asking On Facebook On National Bubble Hockey Association "Group"
Good Luck
Captain KO
|
|
